K 5 Chlorinating Cleaning Powder - 10 Pack (1 oz Each) | Fast-Acting Pool & Spa Cleaner | Ideal for Water Treatment & Surface Disinfection

Product Description

SHAKE AND SOFT SERVE MACHINES CLEANING PROCEDURE1. Remove mix from the machine. 2. Rinse the interior of the machine (cylinder, feed tubes, etc.) by activating the “Wash” cycle and drawing through 2 gallons (7.6 liters) of lukewarm water. Repeat the rinsing procedure until the water runs clear. Turn the machine to the “Off” position.3. Prepare a cleaning solution of KAY 5 by dissolving 1 packet in 2½ gallons (9.5 liters) of lukewarm water.4. Clean machine interior by activating the “Wash” cycle and filling the cylinder and feed tubes with the cleaning solution. Turn the machine to the “Off” position. Brush clean the feed tube and inlet hole. With the cleaning solution in the cylinder, reactivate the “Wash” cycle and allow to remain on for five minutes.5. Drain the solution from the machine. Turn machine to the “Off” position.6. Remove and completely disassemble all machine parts (door, blades, pump, etc.).7. Brush wash all disassembled parts in a suitable detergent in a clean sink.8. Rinse thoroughly under clean running water.9. Sanitize parts by immersing for at least 1 minute in a fresh KAY 5 solution (1 packet dissolved in 2½ gallons/9.5 liters of lukewarm water).10. Remove parts and allow to air dry.11. Repeat the cleaning procedure for machines with two freezing cylinders.This product is suitable for use on materials such as: Aluminum, Brass, Copper, Chrome, Corian, Glass, Glazed ceramic, Glazed enameled surfaces, Glazed porcelain, Iron, Laminated surfaces, Linoleum, Metal, Plastic (such as nylon, polystyrene or polypropylene), Plexiglass, Porcelain, Rubber (such as EPDM or Viton), Sealed granite, Sealed limestone, Sealed marble, Sealed slate, Sealed stone, Sealed terra cotta, Sealed terrazzo, Stainless steel, Vinyl and plastic and Vinyl graphics.